ARC PROMIG-360SYN DPULSE INVERTER MIG WELDER
Model
PROMIG-360SYN DPulse
Rated Input Voltage
3PH~400V ± 15%
MAX. Load Power Capacity
19.35KVA
Rated Output
MIG: 320A/30V
Advanced Features
- Multi-Process Capable - Multi-Process Capable - Welds flux-cored, stick, TIG, pulsed MIG, and advanced processes like Double Pulse MIG*.
- Pulse MIG Process - Welds Mild steel, 4XXX and 5XXX series aluminum for superior quality welding.
- Double Pulse MIG Process - Delivers a staked dime appearance when welding mild steel and aluminum.
- Synergic Control -Set weld procedures with one control.
- Professional 4-Rollers Drive System - Allows for constant wire feed speed and consistent welds.
Pulse MIG
The Pulse MIG process works by forming one droplet of molten metal at the end of the electrode per pulse. Then, just the right amount of current is added to push that one droplet across the arc and into the puddle. The transfer of these droplets occurs through the arc, one droplet per pulse.
It minimizes warping and burnthrough on thin materials, not only for Aluminum, but also for Mild Steel. Moreover, it delivers ultra low spatters which is outstanding for Mild Steel welding.
DOUBLE PULSE
Compared with the traditional DoublePulse, High Speed Double Pulse process can increase the welding speed by about 25%. Welding quality is comparable to TIG process.
No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework, very suitable for welding the thin Aluminum or S.S sheets.
By High-Speed Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack.
| Item No | PROMIG-360SYN DPulse |
| Rated Input Voltage | 3PH ~ 400V ±15% |
| Max. Load Power Capacity | 19.35KVA |
| Rated Duty Cycle(40°C) 60% | MIG: 320A/30V |
| MMA: 320A/32.8V | |
| 1 | MIG: 250A/26.5V |
| MMA: MMA: 250A/30V | |
| TIG: TIG: 200A/18V | |
| Welding Current/Voltage Range | MIG: 10A/14.5V ~360A/32V |
| MMA: 20A/20.8V~360A/34.4V | |
| Open Circuit Voltage | 70V~80V |
| Power Factor | 0.8 |
| Efficiency | 0.8 |
| Pre-Gas Time | Preset |
| Flow-Gas Time | Preset |
| Wire-feed Mechanism | 4 Rollers |
| Wire-feed Speed Range | 0~25 m/min |
| Wire Spool Capacity | 300mm (15kg) |
| Filler Wires (mm) for Fe : | 0.8~1.2 mm |
| For Stainless steel: | 0.8~1.2mm |
| For Aluminum: | 0.8~1.2mm |
| Dimension | 790X250X650mm |
| Weight | 32KG |
Related Products you may be interested!
